Jump to content

German Officers sword

Recommended Posts


Here are some pictures of a german officers sword that I picked up a few years ago.
It's not in mint condition, but still quite decent I would say.
Anyway, edged weapons are not my field of knowledge. And I was wondering about the Portepee on this sword.
I am currently displaying this sword with a german generalleutnant (Liutenant general) uniform. So my question is; should the sword have a different portepee for a generals uniform?
Anyway, here are the pictures.
















  • Upvote 1
Link to post
Share on other sites

I think its the right one, I cant find my books on Sword Portapee s at the moment, I,ve looked on line as well and it has no showings but theres plenty of SS which are very ornate, which you world think a Generals sword should be the same

  • Like 1
Link to post
Share on other sites
Desert Rat

Lovely Sword Bjorn and looks in super condition.....well done in finding it.

Have you built your Museum yet? You need to get all your items in there on display.

Best to you......Ian

Edited by Desert Rat
  • Like 1
Link to post
Share on other sites

To be honest that sword is in very good condition, the only parts that I can see that are not 100% is the scabbard, the blade is very good and the guard is as well, from what I can see there,s no bad parts to it at all, if you really needed to you could have the scabbard re done by a Swordsmith who would make it look 100% original , but are you really worried about it, do you know the makers name under the Eagle, 

  • Like 2
Link to post
Share on other sites

Yes, the sword is very nice, only the scabbard has some damage to the paint. Luckily no dents.

It's a WKC Solingen sword. You can just see the knight's helmet on the blade here.




The WKC solingen factory is still in existence today, making swords, daggers and other dress uniform items.
Have a look at their website - they are offering high quality products. Lots of very nice and decorative items there:




And they are offering refurbishment services too.
I have been playing with the idea of sending the scabbard to the original factory for refurbishment.
But I'm still on the fence about this. The sword and scabbard are in original condition only once.


Best Regards


  • Upvote 1
Link to post
Share on other sites

Home / About WKC / History

Tradition since 1573

1560   The history of the company Weyersberg, Kirschbaum & Cie (W.K.C.) in Solingen began in the early middle-ages, when the trademark „Kingshead“ was registered by the bladesmith Johannes Wundes in 1560.
This trademark is one of the oldest registered and is still in use today.

1573  In the 16th century, the forging technique in Solingen was already quite advanced in its development and Wilhelm Weyersberg, the ancestor of one of the WKC founders, became mayor of the city of Solingen. During this period, the so called „Solingen method“ was invented, which in effect was a division of labour between the „gilds“ (organized groups) in town. Each gild specialized in one part of the sword making production process, e.g. the forging of blades, grinding or hardening. Each process was strictly separated and executed by different persons- no person performed more than one job.
These persons specialized in their fields and became experts which then led to an extraordinary high level of blade and sword quality.Their knowledge was passed down from generation to generation and not shared with anyone outside of their particular gild. The only way to join one of these gilds was to be recommended by one of the current members and these positions were mainly filled by family members who were deemed to be trustworthy.
The quality of the blades became so famous worldwide, that the name „Solingen“ was soon a trademark and stood for quality.
1850  The era of industrialization in Solingen was an important time for the Weyersberg familiy. They became the most important factor of production and marketing of blades in town.
EOne reason for the success was the invention of a roll-forge for blades which Mr. Fritz Weyersberg saw in England. He then purchased the patent and the forge was introduced to and implemented in Solingen. With this machine, which still exists today at WKC, he was able to forge multiple blades in a short space in time.
1854  During this era, another family was also acquired growing influence in Solingen - the Kirschbaum´s. They had dedicated themselves to the marketing of Solingen products, focusing on blades for swords and knives. They registered the second trademark of WKC - the knights-helmet.
1883   The two companies Weyersberg and Kirschbaum joined forces in 1883 and founded Weyersberg, Kirschbaum und Cie. (W.K.C.). Both trademarks were joined and formed the trademark that is still in use today.
WKC developed quickly to be the strongest company in Solingen, with more than 1200 workers and an excellent reputation for various quality products made of steel – from cutlery to bicycles to swords. Even parts for the automobile industry were later produced at the company. Even this early, WKC exported worldwide, from Argentina in South America to Japan. It is not a coincidence, that the first 2 telephone numbers in Solingen, No. 1 and No. 2 were the connections to WKC. So when the German Ministry of Defense called – they would say to the operator: „Solingen 1“ and reach WKC´s office.
Using the strengths of the company, WKC developed into the world market leader for ceremonial swords, edged weapons and military bajonetts. In the late 19th century they produced more than 100000 blades annually and also delivered to other sword producers, e.g. Wilkinson Sword in England, which was formed with the help of Mr. Kirschbaum, the then proprietor of WKC. Many edged weapons of this era are currently found in museums worldwide. Look out for the helmet and the knights head on the blade ricasso when you visit a museum. Possibly, your grand-father´s sword is a WKC.
1922   In the year 1922 WKC was sold to one of their suppliers, the Siegen-Solingen Gußstahlverein, a public company. With the great depression in 1929 though, this company went out of business, leaving the brand WKC abandoned for some time. Before 1933, the company WKC was re-established on a smaller scale and continued with the production of military swords. With a rising demand at this time, WKC became the main supplier of edged weapons to the German Army, and also exported worldwide.
1944   On November 4th and 5th of 1944, Solingen was target of the allied bombers, some time after the neighboring towns Wuppertal and Remscheid had already been destroyed. 800 tons of bombs were dropped on Solingen, mainly in the downtown area where the WKC´s headquarter was located. The company was hit heavily, but due to the fact that many of the tools and machines were hidden in another part of town, Solingen Wald, where WKC produced tubes for bicycles these were saved. Still, production had to be ceased.
1955  The later history of WKC began in 1995. Hans Kolping who was successful entrepreneur in Solingen, producing pocket knives for the American market, e.g. fisherman knives and household cutlery, bought the premises of WKC along with the name and trademarks. The company he purchased it from was a steel supplier of Düsseldorf and had been producing guns and pistons at WKC since the end of the war.
Hans Kolping ceased the production of guns and started manufacturing ceremonial swords again – which was since 1883 the usual core business of WKC. He installed a blade etching department (Damasziererei) and ordered the refurbished the blade forge. In March 1955, the first swords were delivered to Korschenbroich, a small town close to Solingen.
Big orders arrived when Mr. Kolping started traveling by sea to the USA. The US Navy and the Marine Corps liked the WKC´s quality products so much that they awarded the company with such huge orders, that Mr. Kolping could hardly fulfill the requirements. More workers had to be employed and quickly the workforce rose to 50.
Apart from swords, the product portfolio was expanded to include uniform accessories.
1989  In 1989 Mr. Kolping died and left his wife Ms. Margard Willms to succeed him at the company. When she took over WKC she was already 70 years old. This transition was quite an easy one as Ms. Willms had been working with Mr. Kolping from day no. 1 and during her lifetime probably cleaned and packed 400000 swords herself. She along with her step-son Mr. Joachim Willms invested in the refurbishment of the old 19th century factory building and introduced a new state-of-the-art plating department. A few years after this, Ms. Willms retired and left and the management of the company to Mr. Joachim Willms.
1995–2015   At the age of 24, Mr. André Willms, son of Joachim Willms took the company over in 1995. Having not had a functioning sales team since Mr. Kolping deceased, WKC lacked big international customers and orders.
He made it his first point of action to re-activate the customer base and make visits worldwide in order to reintroduce WKC to it’s previous customers as well as to win new ones. After more than 20 years of hard work with growing Asian competition, WKC is now the leading manufacturer of quality edged weapons worldwide with customers in more than 80 countries. More than 600 different types of ceremonial swords are manufactured mainly manually by skilled craftsmen like Schwertfeger, Damaszierer, Handschleifer and others. Apart of ceremonial military swords, WKC supplies a wide range of uniform accesories as well as collectibles, miniature swords and Japanese swords. WKC was the first company in the industry to be certified according to DIN ISO 9002. What needs to be mentioned is the closure of the Wilkinson Sword factory in England in the year 2005 and Mr. Willms bought most of the machines, tools and parts that were for sale.

Today  WKC produces more than 25000 edged weapons to ministries, academies, schools as well as to private persons, collectors and historical clubs. We are proud to have produced various swords for Royals and their Palaces.
Our mission is to keep WKC and the sword industry alive. This includes the very traditional way of manufacturing. We strive for excellent products and satisfied customers in order to maintain jobs for generations. In a quickly changing world of Internet and Clouds, it seems to be more and more important to produce something that lasts for centuries. In doing so, we are dependand on you, our customers to whom we have been devoted since the middle ages.

  • Upvote 1
Link to post
Share on other sites

One of my customers was Wilkinson Sword in Acton and I would go there every month to see what they wanted , and I would stay and watch them making and finishing swords, it was so interesting seeing how they did it, and as you walked into the main front of the office you looked up and saw all the different types of swords hanging on the wall, these dated from modern to very old and there was also original Claymores , these were huge and worth a fortune, i dont no what happened to it all when they closed but it was a real shame

  • Like 2
Link to post
Share on other sites
On 08/04/2021 at 16:48, Björn said:

What needs to be mentioned is the closure of the Wilkinson Sword factory in England in the year 2005 and Mr. Willms bought most of the machines, tools and parts that were for sale.


It actually looks like most of the production eqipment and parts were bought up by the WKC factory.

  • Like 1
Link to post
Share on other sites

I.m not sure that the rare swords went to WKC , these were items that were part of our History, I have an idea that these may have been sent to the Royal Small Arms display in Leeds UK, this is also the place where the Royal Enfield Small Arms factory located to, that was just down the road from me as Enfield lock is where I go fishing and the factory is now a Museum, its also the place where the Sten gun was made and most of the weapons used in WW1 and WW2, its also a place where parts that did not make the grade were tossed into the deep parts of the River Lee (all though they were not allowed to) and are still there, one of my mates was fishing and pulled up a Bren gun barrel , badly rusted, and he tossed it back in and kept on fishing ?????

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...